National Semiconductor

Description

Two-wire Serial Interface. Schmitt Trigger, Filtered Inputs for Noise Suppression. Bidirectional Data Transfer Protocol. 100 kHz (1.8V) and 400 kHz (2.7V, 5V) Compatibility. Write Protect Pin for Hardware Data Protection. 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes. Partial Page Writes Allowed. Jan 27, 2010 Meets JEDEC Specification 42.4 TSE2002B1, 3 Jun 2009. The NXP Semiconductors. SE97B measures temperature from 40 C to +125 C with JEDEC Grade B 1 C maximum accuracy between +75 C and +95 C critical zone and also provide 256 bytes of EEPROM memory communicating via the Oct 10, 2017 Compatible with I2C bus modes: 400 kHz. 100 kHz. Memory array: 4 Kbit ( 512 bytes) of EEPROM. Page size: 16 byte. Single supply voltage: M24C04- W: 2.5 V to 5.5 V. M24C04-R: 1.8 V to 5.5 V. M24C04-F: 1.7 V to 5.5 V (full temperature range) and 1.6 V to 1.7 V (limited temperature range). Features. Single supply with operation down to 1.8V. Low power CMOS technology. - 1 mA active current typical. - 1 A standby current (max.) (I-temp). Organized as 8 blocks of 8K bit (64K bit). 2-wire serial interface bus, I2C compatible. Cascadable for up to eight devices. Schmitt Trigger inputs for noise Jan 2, 2008 Single-Supply with Operation from 4.5V to 5.5V. Low-Power CMOS Technology: - Read current 1 mA, max. - Standby current 5 A, max. 2-Wire Serial Interface, I2C Compatible. Cascadable up to Eight Devices. Schmitt Trigger Inputs for Noise Suppression. Output Slope Control to Eliminate Ground